Orion Motor Tech Excessive-Strain Electrical Air Compressor Pump with Strain Gauge, 4500 PSI/30 MPa /300 BAR Air Pump for Air Rifle PCP Airgun Paintball Scuba Fill Station for Fireplace Preventing and Diving
(as of Jan 11,2022 15:49:07 UTC – Particulars)
An Infinite and Easy Air Provide
Don’t waste effort and time on PCP handbook hand pumps. With our electrical air compressor pump, you’ll fill PCP air rifles, paintball tanks, reservoirs, scuba tanks, and extra with dry air safely and effectively in minutes and even seconds! Get pleasure from straightforward and quick PCPs fillings!
Chrome steel air cylinder with aluminum coating allows a protracted lifespan. To stop the cylinder head from overheating, please change the cooling water each half-hour.
This PCP compressor can pump your scuba or tank to 4500psi / 30Mpa. Keep in mind to close down the machine when the strain reaches 4500psi / 30Mpa. YOU HAVE TO STOP THE MACHINE MANUALLY.
Please ensure to make use of the ISO VG46 & AW46 customary oil. Usually make sure the engine oil stage stays above the purple dot and alter the oil if it discolors.
USE PROPER POWER SUPPLY: Be certain that to attach this to a socket that may take over 8A electrical present, or the circuit could also be broken.
OIL REQUIRED: Fill it up with correct oil earlier than utilizing it. Suitable oil: ISO VG46 & AW46 oil (NOT included）.
COOLING WATER REQUIRED: By no means begin the pump earlier than you’ve gotten sufficient cooling water ready. To stop overheating, please change the water each half-hour.
COOLDOWN: Overworking (Over half-hour) or overheating (over 176°F) will result in an computerized shut-off. If that occurs, cease the merchandise for some time and let it calm down.
KEEP AN EYE ON THE OIL: Be certain that the oil stage stays above the purple dot. Substitute the oil if the colour modifications.
TURN IT OFF MANUALLY: The merchandise gained’t cease robotically when the strain reaches 30MPA/300BAR. YOU HAVE TO TURN IT OFF MANUALLY.
Don’t contact the new cylinder head proper after it stops working.
By no means use this in a damp setting or close to flammable materials. Preserve it out of kids’s attain.
Working Strain: 300BAR / 30MPA/ 4500PSI
Working Functionality: 50 L / min
Inflating Pace: 2800 r / min
Weight: 44.1 lb.
Filling Time: 1L/ 10 minutes
Cooling System: Water
Oil Customary: ISO VG46 & AW46
1 x Air Compressor Pump
2 x Fundamental Machines
1 x Hose Feminine
1 x Water Pump
1 x Water Cooling Pump
2 x Strain Reduction Screw
1 x Certification
1 x Spare Half
1 x Bag
1 x Separator
2 x Energy Cables (110V)
Energy: 110V 60HZ; Motor Energy: 1.8KW; Cost strain: 30MPA; Working Strain: 300BAR 30MPA 4500PSI. Air pump inflating pace: 2800r/min; Work move: 50L/min; Oil customary: IS0 VG 46 & AW 46.
WIDE APPLICATION: An ideal electrical air pump for automobile tires, bike tires, scuba tanks, fireplace combating, paintball, air pistols, leakage detecting, pressure-tight assessments, cars, bicycles, air impermeability assessments, pressure-proof assessments, and many others.
QUICK-FILL PERFORMANCE: It takes solely half-hour to fill a 6.8L tank to 300BAR. Designed with two-stage compression and two water-oil separators for efficiency stability.
COOLING SYSTEM: For easy efficiency, it’s important to put together cooling water and substitute it each half-hour for an optimum cooling impact. NEVER START THE MACHINE BEFORE YOU HAVE ENOUGH WATER PREPARED.
ATTENTION: The compressed air pump will NOT robotically cease when the strain reaches 300BAR/30MPA. It’s a must to flip it off manually!