Linsoul Topping L30 Mini Headphone Amplifier: Output, Impedance, and NFCA Setup

Value: $149.99
(as of Aug 09,2023 07:20:58 UTC – Particulars )

Key Options of TOPPING L30 Amplifier
-Extremely-Excessive Efficiency NFCA modules
-3 steps gaining settings
-an wonderful preamp

Specs

At 1kHz, the Total Harmonic Distortion plus Noise (THD+N) is remarkably low with a weighted accuracy of less than 0.00007% at an output of 500mW for 32Ω impedance and less than 0.00006% at an output of 80mW for 300Ω impedance. These results showcase the exceptional performance of the device, ensuring clear audio quality even at high output levels.

At a frequency range of 20-20kHz with a bandwidth of 90kHz, the Total Harmonic Distortion plus Noise (THD+N) is incredibly low: less than 0.0001% at an output of 500mW for 32Ω impedance and less than 0.00009% at an output of 80mW for 300Ω impedance. These results showcase exceptional clarity and performance, ensuring high-quality audio output across different impedance levels.

Maximize your audio experience with the L30 output: Signal-to-Noise Ratio at maximum output is 141dB at 1kHz A-weighted. The Dynamic Range reaches 141dB at 1kHz A-weighted. Enjoy a precise Frequency Response from 20Hz to 40kHz with an impressive deviation of ±0.05dB.

▶Output Degree
26Vpp@G=L
26Vpp@G=M
26Vpp@G=H

▶AP Measured Noise Degree@A-wt
<0.7uVrms@G=L
<0.7uVrms@G=M
<0.9uVrms@G=H

▶Precise Noise Degree*@A-wt
0.3uVrms@G=L
0.3uVrms@G=M
0.7uVrms@G=H

▶Channel Crosstalk@1kHz:-91dB

▶IMD CCIF@(18kHz+19kHz):-116dB
IMD SMPTE@(60Hz+7kHz):
-110dB@SMPTE4;1
-115dB@SMPTE1;1
▶Enter Sensitivity:
25Vrms@G=L
9.0Vrms@G=M
3.0Vrms@G=H

▶Acquire:
-9.9dB@G=L
0dB@G=M
9.5dB@G=H

▶Output Impedance:<0.1Ω

▶Out Energy
3500mWx2@16ΩTHD+N<0.1%
2300mWx2@32ΩTHD+N<0.1%
280mWx2@300ΩTHD+N<0.1%

▶Load Impedance:>8Ω

L30 Pre-amp Specs

▶THD+N@1kHz A-wt:<0.00006%
THD@20-20kHz 90kBW:<0.00009%
SNR@MAX OUT 1kHz A-wt:141dB
Dynamic Vary@1kHz A-wt:141dB

▶Frequency Response:20Hz-40kHz(±0.05dB)

▶Output Degree:26Vpp@G=L/M/H

▶AP Measured Noise Degree@A-wt

<0.7uVrms@G=L/M
<0.9uVrms@G=H

▶Precise Noise Degree*@A-wt
0.3uVrms@G=L/M
0.7uVrms@G=H

▶Channel Crosstalk@1kHz:-91dB

▶IMD CCIF@(18kHz+19kHz):-116dB
IMD SMPTE@(60Hz+7kHz):
-110dB@SMPTE4;1
-115dB@SMPTE1;1

▶Enter Sensitivity:
25Vrms@G=L
9.0Vrms@G=M
3.0Vrms@G=H

▶Acquire:
-9.9dB@G=L
0dB@G=M
9.5dB@G=H

▶Output Impedance:20Ω

Extensive Functions for Headphones. L30 has a excessive voltage swing of 26Vp-p, energy of 3500mW per channel when each channels are pushed and output impedance of lower than 0.1ohm. It simply drives energy for headphones with a variety of various impedance.
3 Steps Acquire Settings. L30 is provided with three achieve settings of -9.9dB/0dB/9.5dB.Wide selection of achieve settings and the 0.3uVrms ultra-low noise makes L30 simply adapt to all sorts of headphones from extraordinarily delicate IEMs to most energy demanding full-sized over-ears
Excessive High quality Amplifier. The NFCA modules of L30 will not be solely in a position to drive the headphones but in addition apply to be a pre-amplifier with the identical ultra-high efficiency. When it’s in preamp mode, the output impedance is as little as 20 ohm, which is extensively appropriate for varied units. It’s a nice companion of lively screens stacked with E30 DAC when L30 working in preamp mode
Excellent Companion for Audiophile. Designed with a conveyable and compact physique, L30 may very well be your HiFi gadget on-the-go for every single day life. Merely take it anytime wherever, you’ll get pleasure from pure excessive constancy music