Linsoul Topping L30 Headphone Amplifier: Output Power, Impedance, and NFCA Setup
$ 149.99
Worth: $149.99
(as of Aug 09,2023 07:20:58 UTC – Particulars )
Key Options of TOPPING L30 Amplifier
-Extremely-Excessive Efficiency NFCA modules
-3 steps gaining settings
-an wonderful preamp
Specs
THD+N at 1kHz A-weighted: <0.00007% @ 500mW output (32Ω) and <0.00006% @ 80mW output (300Ω). This 7uVrms measurement reflects the level of distortion and noise present in the output signal at a frequency of 1kHz.
At an impedance of 32Ω and an output of 500mW, the Total Harmonic Distortion plus Noise (THD+N) at 20-20kHz is less than 0.0001%. For an impedance of 300Ω and an output of 80mW, the THD+N is even lower, at less than 0.00009%. These results showcase exceptional sound quality with minimal distortion levels.
Output at 1kHz with A-weighting reaches a maximum of 141dB, showcasing the impressive dynamic range at the same frequency. The frequency response spans from 20Hz to 40kHz with a minimal deviation of ±0.05dB.
▶Output Degree
26Vpp@G=L
26Vpp@G=M
26Vpp@G=H
▶AP Measured Noise Degree@A-wt
<0.7uVrms@G=L
<0.7uVrms@G=M
<0.9uVrms@G=H
▶Precise Noise Degree*@A-wt
0.3uVrms@G=L
0.3uVrms@G=M
0.7uVrms@G=H
▶Channel Crosstalk@1kHz:-91dB
▶IMD CCIF@(18kHz+19kHz):-116dB
IMD SMPTE@(60Hz+7kHz):
-110dB@SMPTE4;1
-115dB@SMPTE1;1
▶Enter Sensitivity:
25Vrms@G=L
9.0Vrms@G=M
3.0Vrms@G=H
▶Achieve:
-9.9dB@G=L
0dB@G=M
9.5dB@G=H
▶Output Impedance:<0.1Ω
▶Out Energy
3500mWx2@16ΩTHD+N<0.1%
2300mWx2@32ΩTHD+N<0.1%
280mWx2@300ΩTHD+N<0.1%
▶Load Impedance:>8Ω
L30 Pre-amp Specs
▶THD+N@1kHz A-wt:<0.00006%
THD@20-20kHz 90kBW:<0.00009%
SNR@MAX OUT 1kHz A-wt:141dB
Dynamic Vary@1kHz A-wt:141dB
▶Frequency Response:20Hz-40kHz(±0.05dB)
▶Output Degree:26Vpp@G=L/M/H
▶AP Measured Noise Degree@A-wt
<0.7uVrms@G=L/M
<0.9uVrms@G=H
▶Precise Noise Degree*@A-wt
0.3uVrms@G=L/M
0.7uVrms@G=H
▶Channel Crosstalk@1kHz:-91dB
▶IMD CCIF@(18kHz+19kHz):-116dB
IMD SMPTE@(60Hz+7kHz):
-110dB@SMPTE4;1
-115dB@SMPTE1;1
▶Enter Sensitivity:
25Vrms@G=L
9.0Vrms@G=M
3.0Vrms@G=H
▶Achieve:
-9.9dB@G=L
0dB@G=M
9.5dB@G=H
▶Output Impedance:20Ω
Huge Purposes for Headphones. L30 has a excessive voltage swing of 26Vp-p, energy of 3500mW per channel when each channels are pushed and output impedance of lower than 0.1ohm. It simply drives energy for headphones with a variety of various impedance.
3 Steps Achieve Settings. L30 is supplied with three acquire settings of -9.9dB/0dB/9.5dB.Wide selection of acquire settings and the 0.3uVrms ultra-low noise makes L30 simply adapt to all forms of headphones from extraordinarily delicate IEMs to most energy demanding full-sized over-ears
Excessive High quality Amplifier. The NFCA modules of L30 should not solely capable of drive the headphones but additionally apply to be a pre-amplifier with the identical ultra-high efficiency. When it’s in preamp mode, the output impedance is as little as 20 ohm, which is extensively appropriate for numerous units. It’s a nice companion of lively screens stacked with E30 DAC when L30 working in preamp mode
Good Companion for Audiophile. Designed with a conveyable and compact physique, L30 might be your HiFi gadget on-the-go for day by day life. Merely take it anytime anyplace, you’ll get pleasure from pure excessive constancy music
User Reviews

$ 149.99
There are no reviews yet.