Stainless Steel Flag Pole Holder with Screws - Durable Home Banner Bracket

INSTALLATION:

1. Place the bracket towards the floor and mark the screw holes’ place; then drill the holes by 2″ depth.
2. Tighten the screws to lock the holder to the wall.
3. Slide the pole slowly into the bracket，unlock the pole with the two butterfly screws

Consideration:

Drill first. Use our drill just for wooden base (don’t want the anchors);

for concrete wall, that you must use masonry drill Little bit of 5/16″ (not included)to drill 3 holes for two” depth, then stick the anchors into the wall,lastly the screws.

Bundle contains:

1× flag bracket
3× screws
3× thumb screws
4× growth screws
1×wooden drill bit

Be aware:

There could also be just a little yellow spot contained in the bracket,: this isn’t rust, however bump from the small gap after acid pickling, which may be very regular, don’t worry about this.

Colours shall be barely completely different by every monitor and laptop, please perceive.

BLACK DEMO

This flag pole holder is sturdy, aesthetic. It may maintain up towards robust wind, arise in every kind of climate for many years,good for residential home or business constructing on the wall, porch, yard and so on.

SILVER DEMO

Now we have 3 colours: Black / white / silver to your possibility.

Our purpose is to offer Prime Stage high quality and finest expertise, and we’re at all times standing by to unravel any associated product’s query.

WHITE DEMO

This flag pole holder matches most 1 inch or little smaller diameter flag poles, with 2 adjustable chrome steel nuts to safe the pole, the pole gained’t run out. It’s straight at horizontal 180 diploma or angled at 45 diploma.

Coloration
Silver
White
Black
Blue/White/Purple
Blue/White/Purple
Silver
Materials
T304
T304
T304
Heavy obligation 210D Oxford
Heavy obligation 210D Oxford
Stainless Metal
Rust-Free
✓
✓
✓
Not Utilized
Not Utilized
✓
Assist-usuage
10 years
10 years
10 years
3 Years
3 Years
1 Yr
Wooden drill bit embrace
✓
✓
✓
Not Utilized
Not Utilized
Not Utilized
Wind Resistant
✓
✓
✓
✓
✓
✓

✅Product of 304 chrome steel,this flag pole holder may be very sturdy, it may maintain up in every kind of climate for many years. The built-in molded pole bracket has aesthetic look.
✅This flag pole mount matches most 1 inch diameter flag poles, with 2 adjustable chrome steel nutsto safe the pole, the pole gained’t run out. It’s straight at horizontal 180 diploma or angled at 45 diploma.
✅It comes with all {hardware} screws, and a wooden drill bit included; in case you mount it on concrete or steel floor, that you must drill a 8mm, 5/16 ” gap with a masonary bit(not included).
✅Sustainability – The entire bracket is rust free, corrosion resistance, fireplace and warmth resistance. Incorporates a drainage gap on the backside to let water out, which won’t make your wall soiled.
✅It appears spency, however over the full lifetime of a flag holder, our bracket is the least costly and finest worth possibility. When you have any quesstions, pls contact us. We’ll nonetheless be available to assist. If the screws are lacking, please ship a mail to us, we are going to ship the screws to you.