Efficient Water Pump Mist System for Outdoor Cooling

● Issues needing consideration about pump:
● 1. The pump is DC energy provide. It’s strictly forbidden to attach on to 220 V AC;
● 2. In accordance with the pump parameters, the corresponding voltage, present and movement diameter of the spray gap are chosen.
● 3. Take note of the path of water inlet and outlet. The pump shouldn’t be positioned in a moist place for a very long time.
● 4. No impurities can enter the pump, in any other case it’s simple to dam the pump, leading to stress discount and even no water.
● 5. It’s not allowed to spray water straight on the motor. The motor shouldn’t be assured for water.
● 6. The water pump voltage adjustment screw can’t be adjusted at will, and the stress has been adjusted earlier than leaving the manufacturing facility.
● 7. With a purpose to keep away from extreme heating and cut back the service lifetime of the pump motor, it ought to work intermittently.
● 8. When water freezes in winter, don’t use it with electrical energy.
● 9, after boiling water for one yr, the stress decreases and the amount of the spray is elevated. The pump cowl is opened and the small diaphragm is changed or changed by the diaphragm.
● 10. No gasoline, alcohol, corrosive robust acid, robust alkali, salt water, vinegar, these are not any downside.
● 11. The working atmosphere temperature of the pump: 0 ~ 60 ℃, the pump shouldn’t work within the atmosphere with too excessive humidity; don’t use excessive temperature water or soiled water with temperature greater than 60 ℃.
● 12. The pump shouldn’t be a submersible pump and can’t be utilized in water.
● 13. The pump shouldn’t work constantly for a very long time underneath stress. The continual working time shouldn’t exceed 30-60 minutes. The better the load is, the shorter the continual working time ought to be. It’s endorsed that the continual use time shouldn’t exceed 1-2h when there’s a heavy load comparable to spray gun, nozzle and dense filter display screen!

Checklist of Missing System Merchandise: This kit includes a 12V DC water pump with a 13.2m (43.3ft) power cord, a 3m spray hose, a 10.2m assembly spray line with 18 brass atomizing nozzles, 18 nozzle holders, 40 saddle clamps, 40 cable ties, directions, a 3/4-inch standard faucet adapter, and PTFE tape. Please contact us if any parts are missing. This system is ideal for greenhouse and garden greening, humidifying courtyards, landscape gardening, cooling swimming pools, trampolines, and water parks. It is perfect for irrigating agricultural plants, bonsai, potted fruits, or flowers, providing a cooling mist effect. The system is easy to install with a 0.4mm orifice nozzle diameter and UNC10-24 thread size. The micropump operates at 12V, 60W, with a 5L/min flow rate and 3-7KG pressure. It consumes less power than traditional watering methods. To set up the pump, follow the markings on the inlet and outlet, and contact us for assistance if needed.