Single Sink Tankless Water Heater with 0.5 GPM Flow Rate

SAVE ENERGY, WATER, MONEY, TIME – Atmor provides the environment friendly and handy water heating resolution you’ve gotten been on the lookout for. Atmor 3kW/ 110V Level-of-Use Tankless Electrical Instantaneous Water Heater offers a vast circulate of scorching water with out the wait or fear of ever working out. That’s proper, on the spot scorching water on demand! This unit is particularly designed for hand washing SINGLE SINKS in areas with a minimum of 57°F floor water temps (See Sizing Information). Please observe that this unit is not going to function correctly in Northern areas with inlet water temps colder than 57 levels. A circulate charge of 0.5 gallon per minute (GPM) is required as a way to obtain a forty five° temperature rise. Excellent for residential and business use, this compact unit could be put in in opposition to the wall both underneath the sink out of sight or close to the purpose of use. Unit requires a 30 Amp devoted single-phase breaker. That is NOT a plug in unit. Required wire measurement: 10 AWG. Customary 1/2″ NPT (straight thread) fittings. Most circulate charge is 0.5 GPM. Most temperature rise potential for unit is 45°F. For security causes, the included Strain Reduction Machine (PRD) included have to be put in in your water heater per the directions within the proprietor’s handbook. With a view to obtain most efficiency, it’s endorsed to put in the included 0.5 GPM sink aerator. Failure to adjust to the set up and working directions in our House owners Guide or improper use will void the guarantee. The water heater have to be put in by a licensed electrician in compliance with all native and constructing rules.

Experience instant and limitless hot water on demand for a single sink without the wait or worry of running out. This unit is designed for areas with a minimum floor water temperature of 57°. With a flow rate of 0.5 GPM, it can provide a temperature rise of 45°F. For even greater temperature rise, you can opt for a slower flow rate. The maximum tested working pressure is 16 BAR (230 PSI). This unit must be directly connected to a 30 Amp single-phase breaker using a 10 AWG wire, as it is not a plug-in device. It also features a 0.5 GPM Aerator for the sink faucet and a Pressure Relief Device (PRD).