Anbull 80cc Bicycle Engine Package: 2-Stroke Gasoline Motor Kit

Get everything you need for your motorized bicycle in one convenient package. This kit includes an 80cc bicycle engine, carburetor, ignition coil & CDI, throttle handlebar set, throttle cable, clutch cable, kill switch, clutch lever, chain, chain cowl, 44T Sprocket with 9 Gap Clamp Pads, chain tensioner, gasoline tank, gasoline filter, gasoline gas line, petcock, muffler, and all the essential mounting brackets, gaskets, and hardware. With this kit, you'll be ready to hit the road in no time.

Set up Guide
1. When putting in the chain, chain wheel and sprocket needs to be saved in the identical straight line.
2. After Carburetor and Throttle Cable have been put in，Flip the Throttle to examine whether or not carburetor is working appropriately.
3. Putting in Clutch cable: maintain the clutch deal with then spin the rear wheel of bicycle and examine if it spins usually. Launch the clutch deal with, the wheel ought to cease spinning.
4. Adjusting the Chain tightness: Tighten up the chain, apply pressure to press the chain downward, the sagging down top inside 0.5~1cm is taken into account perfect.
5. Spark plug, muffler, carburetor set up: Tighten all bolts
6. Verify all wires are linked correctly.

warning to be used
1. Make certain the oil and gasoline has fully been blended earlier than using.
2. Run-in interval (Gasoline: 2-stroke oil) combination ratio 18：1 . After 30：1
3. When begin working a brand new engine, in the course of the preliminary 500km Run-in interval, full throttle and excessive velocity for very long time is very not really helpful.
4. Ensure that drain off all gas from the carburetor if the engine just isn’t in use for a very long time.

Warning
Verify brakes earlier than working !
Using velocity needs to be managed under 40Km/h !
Please adjust to site visitors guidelines !.

Stroke
2
2
4
2
2
output
80cc
80cc
49cc
80cc
100cc
begin
Pedal
Pedal
pull begin
electrical begin +Pedal
Pedal

🚴 2 Stroke 80cc bicycle engine equipment is ideal to improve the common bike to a motorized bike,you possibly can having fun with using at a quicker velocity, which might attain 38km/h as quick as a bike or scooter. (For set up video,pls contact with us through electronic mail).
🚴 80CC Motorized Bike Package: Suits for many 26″ or 28′ wheeled bikes with V-frame. The body ought to have Sep 11″ of clearance between the underside bracket and prime bar, and the diameter of the body tubes needs to be 25-29mm (round an 1″).
🚴 Lubrication Oil: oil for two stroke petrol engine (or oil for 10W/40.10W/30); Mixing Ratio of Gasoline and engine Oil: 16:1 for brand new units, 20: 1 after working 500km.
🚴 Key parameters: bore and stroke-47mm & 40mm, Max. energy 3 horsepower/5000r/min, Tremendous fuel-efficient, solely consuming 2.5L gas/100km.
🚴 Mode of Engine: Single cylinder, air-cooling, 2-stroke Pure air cooling; The rider wants some primary {hardware} instruments, expertise and round 2-3 hours to put in. Add some lubricant into the air cylinder earlier than beginning.