Buying a Bucket Paint Strainer
Bucket Paint Strainers is a vital tool for painting contractors and painters working on larger jobs. Many people think of them as a paint mixer, but they do much more than that. A paint sprayer is what you use to paint with, but a bucket is what you use to transfer the paint from the sprayer onto your painting surface. This is much different than using the paint brush. You pour the paint into the bucket and then use the strainer to catch any paint that falls out or spits out.
Painting contractors need a good strainer to make sure that all of the paint is removed from their paint brushes and surface. Without it, there will be water spots all over your painted surfaces when you get ready to paint. If the paint brushes are dipped in the paint, and it doesn’t come out, then it will soak into the paint and leave unwanted water spots. This will also attract dust, dirt, and dirt particles, which will affect how the paint comes out and how well it cures.
The size of the bucket does make a difference when it comes to choosing a paint strainer. Painting contractors need one that can cover the full surface of the bucket, so that all the paint can be removed. If you only paint small areas, you may be able to get away with using a smaller bucket, but you must be very careful when doing this. Painting small surfaces, such as car doors, can cause serious damage to the paint. It can also scratch the paint surfaces so badly that it will be impossible to get them looking good again.
There are two types of paint strainer on the market, each with its own specific purpose. A strainer that fits underneath your bucket is the most effective when cleaning paint brushes. These can be set on top of the bucket, and the bristles are simply lifted up and out of the bucket. The problem with these is that they are pretty hard to clean, so painting usually doesn’t improve much with them.
A strainer that fits over your bucket is the best choice when trying to clean the paint brushes. These can be set right on top of your bucket, and the brush heads can be lifted up and out of the bucket. These can be cleaned easily, although there isn’t usually much room for you to move the brush heads around. It takes a little bit of work to get these clean, and many times it is recommended that you paint on a test area before attempting to clean these.
You must always read the instructions that come with your paint strainer. Some can cause problems if not used properly, so you should follow them carefully. Many people believe that paint brushes will just slide off the bucket, but this isn’t true. The actual paint is securely holding in the brushes, so it is impossible for the brush to move off of the bucket. Just be sure you read the instructions when you purchase your paint bucket strainer to avoid any problems.